.:Info
Nick: Jipa  Info
Age: 32
Location: Tampere

.:Projects by user
  • Domoblaster
  • Dimmer
  • Working light for a drill press
  • Bunnypedals
  • Led light
  • Custom TFT stand
  • Halogen light system

    • .:Albums
    View all albums

  • Default
  • Bittikaiuttimet 2.0
  • Blaster
  • Blaster 2
  • Blaster 3
  • Dimmer
  • Halogeeni
  • Led light
  • Linkwitz
  • P180B
  • penkkiporavalo
  • Room
  • Test bench
  • the OMG case

    • .:

    Uploaded: 30.12.2007 23:45
    Categories: Electronics

    Jipa - A triac controller that I've been planning for ages and am finally building. So far it has four channels, but I'm gonna make a s

    A triac controller that I've been planning for ages and am finally building. So far it has four channels, but I'm gonna make a second PCB there to house further 4 channels.

    The triacs I'm using are rated at 9 amp RMS current, which means that I can control 8*9=72 amps continuous current. On 12 V lamps this means over 800 Watts and if I made the system to handle 230 Volts (which I'm not, because all the insulations would be very, very bad PITA to make properly) it could handle about 16 kW power.... That's the theory at least :D

    More to come.


    Remove this ad by registering or by logging in.

    Remove this ad by registering or by logging in.



    Login with your Facebook account to comment:



    20.01.2008 13:09 JipaUPDATE: http://youtube.com/watch?v=ROWD1eiT5aA It's all systems go as the first 4 channels are wired up and reaady to go! The bottom PCB is all made as well, it just needs some connectors.
    30.12.2007 23:51 JipaOh I guess I forgot to mention what is it.. It's a device with which I can control AC-lamps via LPT-port or any other TTL (5/0 Volts) signals.
    30.12.2007 23:47 JipaDuring testing the triacs were mounted to the heatsink using some random plastic parts and a clamp (seen on the right) they need to be insulated from the heatsink, so I'll have to figure how that can be done easily.