.:Info
Nick: metalfusion  Info
Age: 30
Location: Tampere

.:Projects by user

.:Albums

.:

Uploaded: 06.02.2009 17:02
Categories: Full case | Single case mods | Cooling

metalfusion - Quite basic (but ugly) interior setup. PSU is located under that white plate that used to be part of the cover. That black box w

Quite basic (but ugly) interior setup. PSU is located under that white plate that used to be part of the cover. That black box which also works as an extension cord for the PSU is "Current and Voltage sensor" that came with the Zalman fan controller so it can show the system's current power consumption.

Also the fake leather was sold in 1,5m wide pieces which wasn't enought to wrap the whole case around so the bottom part isn't completely covered. It's not like you can see it anyway. (And I didn't want to buy at least twice as much of the stuff than needed for this project)

The metallic frame can be removed from the "wooden shell" for hardware installation and isn't fastened in any way as it sits very tightly there and optical drives keep it in place anyway.


Remove this ad by registering or by logging in.

Remove this ad by registering or by logging in.




Login with your Facebook account to comment: