.:Info
Nick: metalfusion  Info
Age: 30
Location: Helsinki

.:Projects by user

.:Albums

.:
DIY CNC 2

Author: metalfusion
Used time: 60 hours in CAD, 100 hours building.
Cost: 500-600e (upgrade from cnc1) 1200-1300e (built from scratch)
Categories: Handicrafts | Tools | Electronics

I have been doing some test cuts on aluminium, planning to replace some of the z-axis parts with ones made from alu.

The very first test cut, should have used smaller acceleration values. (the best part is from 6 minutes onward)

It came out pretty nice anyway.


New router mounts made from 12mm plate.


The chips from cutting one router mount (I cleaned the table after cutting the first one)