.:Info
Nick: metalfusion  Info
Age: 30
Location: Helsinki

.:Projects by user

.:Albums

.:
DIY CNC 2

Author: metalfusion
Used time: 60 hours in CAD, 100 hours building.
Cost: 500-600e (upgrade from cnc1) 1200-1300e (built from scratch)
Categories: Handicrafts | Tools | Electronics

I got the gantry sides built last friday, took about 5 and a half hours.

All the parts ready for assembly. T-nuts will be used to assemble & fasten the gantry together.


As always, everything is held together by wood glue and brad nails. I bought 700 brad nails when I began this project and have less than 50 left. I've also used about half a liter of glue.

Next weekend I will build the lower and upper horizontal gantry structures. This project is going well! :)